Showing posts with label Bennett. Show all posts
Showing posts with label Bennett. Show all posts

Wednesday, 13 July 2011

Pole Sister - Nissan R90CK

Like the Lancia LC2 seen in Monday's post the Nissan R90CK seen here at Colin Bennett's CGA Engineering Workshop is scheduled to appear at the Silverstone Classic for the Group C race next weekend.

Nissan R90CK, CGA Engineering

Three serious works teams gathered to contend the 24 hours of Le Mans in 1990, Jaguar with three cars were the eventual winners, Toyota with three cars did not really figure, but Nissan with 5 front line R90CK cars became the first Japanese manufacturer to sit on pole position at this endurance classic.

Nissan R90CK, CGA Engineering

The Nissan R90CK's were built around Lola T90/10 chassis

Nissan R90CK, CGA Engineering

and prepared for the World Endurance Championship by Nissan Motorsports Europe.

Nissan R90CK, CGA Engineering

This particular vehicle has a rear facing camera connected to the screen seen here to aid reversing. Mark Blundell's pole winning 3m 27s Le Mans qualifying lap immortalised with cockpit cam can be seen on this mind boggling youtube clip.

Nissan R90CK, CGA Engineering

It is said that Mark had over 1000 hp available during his qualification lap from his 3.5 litre / 213 cui Nissan VRH35 V8 motor,

Nissan R90CK, CGA Engineering

thanks to a ceased turbo waste gate.

Nissan R90CK, CGA Engineering

Mark recorded a top speed of 226.9 mph on the Mulsanne Straight speed strap between the two newly installed chicanes a record that apparently still stands.

Nissan R90CK, CGA Engineering

Six months after the unlikely Mazda victory at Le Mans in 1991, a NISMO version of the Lola T90/10 the Nissan R91CP won the 1992 Daytona 24 hour race in the hands of Masahiro Hasemi, Kazuyoshi Hoshino and Toshio Suzuki.

Nissan R90CK, CGA Engineering

At the end of the 1990 season Nissan withdrew from the World Prototype Sportscar Championship but continued to develop the RC90CK cars for the All Japan Sports Prototype Championship which the manufacturer won in 1990,'91 and '92.

Nissan R90CK, CGA Engineering

This particular car is now owned by Katsu Kubota.

Nissan R90CK, CGA Engineering

While there is still a good supply of parts for these vehicles

Nissan R90CK, CGA Engineering

the cost of running one is expensive.

Nissan R90CK, CGA Engineering

In 1990 the car driven by Kenny Acheson, Olivier Grouillard and Martin Donnelly

Nissan R90CK, CGA Engineering

qualified in 5th place at Le Mans but was eliminated on the opening lap with a gearbox problem.

Nissan R90CK, CGA Engineering

I shall look forward to seeing this car in action, 21 years after I first saw one, at the Silverstone Classic next weekend.

That concludes a series of three Group C blogs, my thanks to Colin Bennett for his hospitality and Tony Gallagher for organising the trip to Colin's workshop.

Hope you have enjoyed today's ceased wastegate edition of 'Gettin' a lil' psycho on tyres' and that you will join me again tomorrow. Don't forget to come back now !

Wednesday, 1 June 2011

Added Warrington - CGA Engineering

Thanks to Tony 'Giraffe' Gallagher at The Nostalgia Forum I found myself going to Warrington with fellow TNFer and secretary of the Bristol Pegasus Motor Club Tim Murray. The purpose of the journey was to visit Colin Bennett and his sons who run CGA Engineering.

Colin who worked with Emerson Fittipaldi on a Brazilian excursion with the Lotus Formula 2 team in 1970 has run a huge variety of cars including March, Fittipaldi, Surtees, Williams and Ligier in a variety of British and European Series.

Benetton B191, CGA Engineering

After a welcome which included tea and donuts Colin let half a dozen TNFers loose in his workshops to nose and poke around a mouth watering selection of vehicles, amongst the many demonstrations was how easy it would be to fire up an ex Schumacher 3 .5 litre / 213.5 cui Benetton 191 chassis #6 powered by a Ford HB engine, we were one click of a switch away from having our ears blown off !

Lola T70, CGA Engineering

At the opposite scale of the age range Colin was rebuilding a Lola T70 carrying the chassis plate SL76/143, there is something appealingly Romanesque about those knockoff wheel hubs.

March 71B, CGA Engineering

Sitting outside the workshops was a Formula 2 spec March 71B chassis #71BM -08 painted at the behest of current owner Katsu Kubota in the colours carried by one of my hero's Ronnie Peterson who won the 1971 European Formula 2 Championship for open wheel 2 litre / 122 cui vehicles.

March 761, CGA Engineering

Back in 1976 I was extremely privileged to see this March 761 in action on a wet day of practice at the Nurburgring. The sight of this car driven by Ronnie Peterson in a series of controlled slides through a series of off camber blind apex corners is something I shall never forget. Ronnie qualified 11th and unfortunately was involved in a first lap accident.

Nissan R90CK, CGA Engineering

I was at Le Mans in 1990 when this Nissan R90CK qualified 5th for the 24 hour classic unfortunately the car retired on the opening lap, like the March 71B and 761/6 today this car belongs to Katsu Kubota and is scheduled to appear at the Silverstone Classic meeting I blogged about yesterday.

Williams FW06, CGA Engineering

The design details of the Williams FW06 by Patrick Head won much praise in 1978, although the car did not win any Grand Prix it marked the emergence of Williams Grand Prix Engineering into what would become a dominant force in Formula One in the 1980's and 1990's.

I shall look forward to bringing you more detailed blogs of some of these cars after I have seen them running in the weeks and months ahead.

My thanks to Tony, Colin and his sons for a memorable day.

Thanks for joining me on this Warrington edition of 'Gettin' a lil' psycho on tyres', I hope you will join me again tomorrow. Don't forget to come back now !