Suspension by Chris Lawrence - Morgan Aero 8

Up until 2000 the last time Morgan had introduced a new body style was 1964, only 26 glass fibre bodied +4+ cars were built over 4 years and since that time Morgan have successfully focused on improving a design that dates back to 1936.



In 2000 Morgan launched a genuinely ground up new 'retro' design the Morgan Aero 8, a clear nod to Morgan's successful past with an eye on the future.



The heart of the Aero 8 was a 325 hp 4.4 litre / 268.5 cui BMW V8, with fake Morgan cam covers, capable of accelerating the car from rest to 60 mph in 4.5 seconds and on to a top speed of over 170 mph.



The all new aluminium chassis, completely unrelated to the steel ladder chassis of earlier models, was developed with the help of Morgan's best known racing exponent and tuner Chris Lawrence. Unusually for a vehicle with this kind of performance the chassis and suspension are so stiff that the suspension does not have anti roll / sway bars.



The Aero 8 has since been offered as a limited edition coupé the Aero Max, of which just 100 have been built and the Targa topped Aero SuperSports. Production of these cars is coming to an end at the Morgan factory, in anticipation of a new Morgan 4 wheel model.

An insight into some of the work of Chris Lawrence, who passed away on August 13th, can be found on this link.

Thanks for joining me on this edition of 'Gettin' a lil' psycho on tyres, I hope you will join me again tomorrow. Don't forget to come back now !

Ferrari's First F1 Design - Ferrari 125 F2 Spec #0114

In 1948 Ferrari built his first dedicated 125 F1 Grand Prix cars known to conform with the set of rules known as formula one and entered three of them into the 1948 Italian Grand Prix, held at Valentino Park on the 5th of September. Frenchman Raymond Sommer brought his 125 F1 home in third place. The Ferrari 125 WAS NOT however the first Ferrari ever to be entered in a race run to formula one regulations.



The 125 F1 shared it's 1.5 litre / 91.5 cui super charged V12 engine design, by Giocchino Colombo, with earlier successful Ferrari sports cars including the 166 series and the 125S series.



This particular chassis thought to have been built in 1949 for the factory racing team, appears to have been successfully raced with a normally aspirated 2 litre / 122 cui Colombo V12 to conform to the second tier Formula Two regulations in 1951 by Englishman Peter Whitehead in Europe and Australasia.



During the late 1950's this chassis had a Chevy V8 installed which was replaced by a remanufactured 2 litre V12 when Tom Wheatcroft had it restored in the 1970's for his Donington Collection where these photographs were taken.

The 125 F1 was not a great success against the older Alfa Romeo's, which led Ferrari to build his next formula one cars with larger unsupercharged engines with which one of his cars would win Ferrari's first championship formula one race in 1951.

Thanks for joining me on this Ferrari Friday edition of 'Gettin' a lil' psycho on tyres, I hope you will join me again tomorrow. Don't forget to come back now !

Halfway House - Volvo 144

The Volvo 140 launched in 1966, which superseded the Volvo 120 Amazon series, was the seed design that stayed in production across two distinct series of models for thirty years until 1996. The 140 design was significantly updated in 1973 as a precursor to the 240 series launched in 1974.



This 1973 140 model, a halfway house between the original 140 series and forthcoming 240 series, has many interior features familiar to early 240 owners including much of the entirely padded plastic faced dashboard, round, replacing the previous strip, instrumentation and rocker switch gear.



For 1973 power for the 140 series came from a 1986 cc / 121 cc straight 4 cylinder Over Head Valve B20 motor itself the last iteration of a design born out of the Volvo V8 B36 motor used in Volvo commercial vehicles.



The tail of the 1973 and '74 140's is also identical to that on the early 240 series the only thing missing is the much larger energy absorbing bumpers of the latter model.

The 140 series was dropped in 1975 with final production of all 140 variants since 1966 totalling over one million units which were built at plants in Torslanda Sweden, Ghent Belgium, Halifax Nova Scotia Canada, Melbourne Victoria Australia and Shah Alam Malaysia.


Thanks for joining me on this Halfway House edition of 'Gettin' a lil psycho on tyres', I hope you'll join me again tomorrow. Don't forget to come back now !

Simple Joys - Morgan 3 Wheeler

Last November when I visited the Morgan factory there was much debate about a rumoured revival by Morgan of their fabled 3 wheel concept, which was abandoned when the last Morgan F-4 left the factory in 1953, with an updated design powered by a Harley Davidson motor.



The truth that emerged was a little more complex, when earlier this year Morgan launched their 3 Wheeler at the Geneva motor show, with this particular vehicle on their stand.



Self taught engineer, Pete Larsen from Seattle is the man responsible for putting the Morgan name back on three wheel vehicles. A couple of years ago Pete developed a Harley Davidson powered space frame Morgan tribute 3 wheeler which was marketed under the Liberty Ace brand.



After reading a UK newspaper report on this vehicle Morgan executives visited Pete's workshop and ended up buying the business. Pete now makes the HD powered Liberty Ace under license from Morgan while Morgan have re engineered Pete's design to take a 115hp S&S 'X-Wedge' V twin manufactured in Wisconsin.



The reengineered Morgan comes with a detachable steering wheel, to ease access, that is connected to a Quaife steering rack, in place of the Mustang modified rack used in the original Liberty Ace, the transmission on both vehicles is a Mazda 5 speed which drives the rear wheel.



The Matt Humphries designed aluminium bodywork is manufactured by Premier Sheet Metal in Coventry.



After the initial production run a special Superdry Edition has already been planned complete with bespoke Superdry branded tyres !



High profile car enthusiast, owner and fan of old Morgan 3 wheelers Jay Leno was one of the first 500 customers to order one of the cycle cars which tip the scales at just over 1000 lbs / 500 kgs and can reach 60 mph in under 5 seconds.



I have never driven a Morgan or 3 Wheeler of any description but watching Jay drive the car I have to believe that 'there is nothing quite like driving a 3 wheeler, it just makes you smile', rather like reading my favourite 'Simple Joys' blog written by another Morgan 3 wheeler fan Chief 187, who's birthday happens to be today.

Happy Birthday Chief 187, this one is just for you !

Thanks for joining me on today's three wheel edition of 'Gettin' a lil' psycho on tyres', I hope you will join me again tomorrow ! Don't forget to come back now !

Powered Under Licence - Rover P5B 3.5 litre Coupe

In September 1960 the author of a technical review on the then new all aluminium 185 hp Buick 215 V8 engine could have had little idea of how prophetic for the British automotive industry his following words would be, "We will wager that the most widely copied engine of the next 10 years will be the superb new aluminium V8 by Buick."



Despite it's glowing press the Buick V8 and various Oldsmobile and Pontiac variants these motors were only in production from 1961 to 1963, after 750,000 units had been produced the Buick, Oldsmobile and Pontiac switched back to cheaper to manufacture iron blocks which were cast with thinner walls than had hitherto been possible.



Rover managing director Bill Martin-Hurst was on a sales mission trying to get Mercury Marine in Wisconsin interested in Rover gas turbine engines for marine applications when he stumbled across a Buick V8 being prepared for power boat racing on the Mercury Marine shop floor.



Bill realised immediately that such a motor might have a future in several Rover car projects and had the motor on the shop floor shipped to England and made enquires at GM about making their recently discontinued aluminium motor under licence.



Somewhat disbelieving GM agreed a deal which eventually included the soon to retire designer of the aluminium Buick 215 Joe Turley who would help prepare the V8 for production in a market that put engines under more stress, no speed limit at the UK at the time, than encountered in its original US application.



The Buick V8 was first tested in a P6 prototype, but the final iteration of older P5 design seen here, with a B for Buick designation, was the first Rover to be offered to the public with an aluminium Buick 215 V8 derived motor in 1967.



Four successive British Prime Ministers and the Queen of England used P5B's, so impressed was the British government with these vehicles that they bought the last batch of them for future government ministers to use in 1973. Indeed Prime Minister Margret Thatcher was often seen in one as late as 1979, before switching to a Jaguar.



A Rover P5B featured alongside a Lamborghini Islero in 'The Man Who Haunted Himself' starring Roger Moore, Olga Geoges-Picot and Hildegard Neil.

Vehicles featured on GALPOT that are powered by variations of the aluminium Rover V8 include :-

CMT

Reliant Scimitar GTE V8

Triumph TR7 Rally Sprint Replica

Triumph TR8 Convertible Replica

Triumph TR8 Twin Turbo

Further examples of Rover V8 powered vehicles can be found in these less specific blogs :-


GMC Suburban

Darian Wildcat T89 GTR

MGB Kayne Special

Rover SD1

Thanks for joining me on this Powered Under License edition of 'Gettin' a lil' psycho on tyres', I hope you will join me again for a Scandinavian Edition tomorrow. Don't forget to come back now !

Meridian Date - Bristol Concours d'Elegance

Yesterday I travelled 2 degrees, 35 mins 45.25 seconds East to the Meridian line at Greenwich in London with Florian, my guest from France, to see the Bristol Concour's d'Elegance, where a fine selection of Bristol Cars and a single Fraser Nash BMW, representing over 60 years of automotive history was accumulating in the grounds of the Old Naval College.



Oldest car at the show was this 1939 Frazer Nash BMW 321, Frazer Nash were in partnership with the Bristol Aircraft Company when the latter diversified into the automotive market after WW2.



Several Bristol 400's, the manufacturers first model, were present all in immaculate condition, this 1971cc, 120 cui six cylinder being maintained by Bristol Owners Club (BOC) member Derek Hughes.



Among many Bristol models I saw for the first time was the 402 of which only 23 examples were built, this one belonging to Richard Weale.



I know the father of one GALPOT regular used to race an Arnolt Bristol so it was a particular thrill to see and above all hear this car being started up by Kenneth Andrén who brought this car over from Sweden.



There were several Bristol 406's, which featured roof mounted indicator lights, present this one belonging to Edward Anderson.



Chrysler supplied the motor's for all Bristol models starting with the 407 in 1961, this is the 6277 cc / 383 cui big block Chysler B series V8 fitted to the 411 Series 2 belonging to Jamie Davenport.



In 1976 the 603 model was introduced a car that owed no heritage at all to the Bristol 407 that had been continually upgraded from 1961 and formed the basis of a succession of new models. This is the cockpit of the 603E belonging to Fergus Taylor-Gregg.



Newest of the Bristol's present was the 2009 Blenhiem (603 Series 4) of Richard Levine.



91 year old Bristol Works Director, until the factory closed earlier this year, the sprightly Syd Lovesy was amongst those who handed out the prizes at the end of the day. Syd is seen here with Richard Vaughan and the unique 1963 Bristol Viotti 407 styling exercise that once belonged to comic actor Peter Sellers.



Concours d'Elegance award winning cars included the 400 of Ashley James, the 403 of John Manley, the 405 of Cyril Milward, the 411 Series 2 of Jamie Davenport, a 412, the Arnolt of Kenneth Andrén, and the last one I can positively identify in the line the Fraser Nash BMW 321.



Car of the day for me was definitely the Arnolt, hats off to Kenneth bring this car over from Sweden, thanks to everyone at the Bristol Owners Club who made this a day for Florian and I to remember.

Thanks for joining me on this Meridian edition of 'Gettin' a lil' psycho on tyres', I hope you'll join me again tomorrow to see how the Aluminium Buick 215 V8 came to impact the British motor industry. Don't forget to come back now !

The Unvanquished Tough Nut From Chippenham - Invicta S1

Invicta is a name that has popped up from time to time in the automotive industry since 1900 when the name appeared on cars made in Finchley, London until 1905. The following year, 1906, the Invicta name was intended to be used by a vehicle manufacturer in Turin.

A third unrelated incarnation of the Invicta name was used by Clarks Eng. Wrks Ltd in Leamington Spa, Warwickshire in 1914.



The fourth and to date most successful incarnation of Invicta appeared when Noel Macklin teamed up with Tate & Lyle sugar heir Oliver Lyle in 1925. Based in Cobham, Surrey they aimed to build a range of vehicles that matched Rolls Royce for quality and Bentley for speed using proprietary 6 cylinder Meadows engines until it's demise in 1935.



The fourth incarnation of Invicta achieved a fair ampun of publicity as a result of Noel Macklins sister in law Violette Cordery being awarded the Dewar Trophy in 1926 after averaging a fraction over 70 mph over 5,000 miles (8,000 kms) at Montlhery and again in 1929 after driving 30,000 miles (48,000 kms) in 21 days averaging a fraction over 61 mph at Brooklands. Donald Healey also won the Monte Carlo Rally outright in 1931, despite bending the chassis in an accident in Norway soon after the start of the event.



In 1946 the Invicta company was reformed in Virginia Water and produced a Meadows powered Black Prince, only 16 of which were manufactured before production ceased and the brand name was sold to Frazer Nash the vehicle manufacturer, not the same Frazer Nash that bought the remains of the Bristol Car Company recently.



The Invicta name has also twice been used by Buick as a model name.



The most recent incarnation of the Invicta vehicle brand surfaced in 2004 with this monster of a sports car, built in Chippenham, available with up to 600 hp from a hand built Ford Special Vehicles Team (SVT) supplied V8.



Carrying the same name as the most successful pre-war model, used to win the Monte Carlo Rally in 1931, the S1 is built around a steel tube space frame featuring a safety roll cage and is claimed to be the strongest chassis ever tested by UK safety officials.



The body, designed by Leigh Adams and his Automotive Design & Prototyping studio, is a single piece of carbon fibre which further reinforces the chassis strength.



Invicta claim the S1 will reach 60 mph from rest in 3.8 seconds and that the aerodynamics will keep the car stable to over 200 mph.... where permitted.



Production of the S1 is limited to 50 per year, when I was on my way to Castle Combe last weekend I heard one and then saw it come cruising past in my rear view mirror, this car has an awesome presence when on the move.

Thanks for joining me for this unvanquished edition of 'Gettin' a lil' psycho on tyres' I hope you will join me again tomorrow. Don't forget to come back now !